Uploading Pictures via FTP Automatically
The following describes the basic procedure for automatically uploading pictures to the FTP server as they are imported from the camera into an album in NX MobileAir.
-
Create an FTP server profile.
-
Enable the setting to automatically perform FTP upload when importing pictures.
Enable [Upload automatically after import] in the album settings display (0Automatically Uploading Imported Pictures to the FTP Server (FTP Upload Settings)). Select the destination FTP server profile.
- You can also configure pictures to be automatically straightened or resized when uploading them to the FTP server.
-
Connect the camera to the smart device.
A dialog asking whether to import pictures automatically will be displayed. By tapping [OK], pictures will be imported from the camera into an album in NX MobileAir, then uploaded to the specified FTP server.
- To learn more about connecting devices, refer to Connecting the Camera to the Smart Device with a Cable or Connecting the Camera to the Smart Device Wirelessly (Supported Cameras Only).
- If [Import] is selected for [Import when camera connected], import will begin automatically when the camera is connected, and a confirmation dialog will not be displayed (0Configuring Import Behavior (Camera Import Settings)).
- If you take a picture while the devices are connected, it will be imported immediately without displaying a confirmation dialog even if [Ask before import] is selected.
Selecting All Pictures for Which FTP Upload Has Failed
If FTP upload fails, 
icons will appear at the top left corners of the affected pictures in the thumbnail list. These pictures can be selected for upload by tapping the 
(menu) button in the gallery display and choosing [Select FTP upload failed pictures] (0Gallery View).
-
Create an FTP server profile.
-
Enable the setting to automatically perform FTP upload when importing pictures.
Enable [Upload automatically after import] in the album settings display (0Automatically Uploading Imported Pictures to the FTP Server (FTP Upload Settings)). Select the destination FTP server profile.
- You can also configure pictures to be resized when uploading them to the FTP server.
-
Connect the camera to the smart device.
A dialog asking whether to import pictures automatically will be displayed. By tapping [OK], pictures will be imported from the camera into an album in NX MobileAir, then uploaded to the specified FTP server.
- To learn more about connecting devices, refer to Connecting the Camera to the Smart Device with a Cable or Connecting the Camera to the Smart Device Wirelessly (Supported Cameras Only).
- If [Import] is selected for [Import when camera connected], import will begin automatically when the camera is connected, and a confirmation dialog will not be displayed (0Configuring Import Behavior (Camera Import Settings)).
- If you take a picture while the devices are connected, it will be imported immediately without displaying a confirmation dialog even if [Ask before import] is selected.
Selecting All Pictures for Which FTP Upload Has Failed
If FTP upload fails, icons will appear at the top left corners of the affected pictures in the thumbnail list. These pictures can be selected for upload by tapping the (menu) button in the gallery display and choosing [Select FTP upload failed pictures] (0Gallery View).