You can do the following when you pair the camera and a smart device installed with the dedicated app, “SnapBridge 360/170”.

  • Upload captured still images and movies to the smart device
  • Use the smart device to perform remote photography or play back images
  • Change the camera settings

Camera

  • Turn off the camera (ATurning Off the Camera). The camera cannot enter pairing standby mode when the camera is on.
  • Turn off the airplane mode switch (AAirplane mode switch). You cannot pair when it is on.
  • Use a sufficiently charged battery so that the camera does not turn off during the procedure.
  • Insert a memory card with sufficient free space.
  • Disconnect the HDMI cable or USB cable.

Smart Device

  • Enable Bluetooth and Wi-Fi on the smart device. If you will use NFC, enable NFC.
  • Download and install the dedicated app, “SnapBridge 360/170,” from the Apple App Store® for iOS or from Google Play for Android.

    • “SnapBridge” cannot be used with this camera.

    • You can check the OS versions that SnapBridge 360/170 supports by visiting the download sites above.

SnapBridge 360/170

  • The display language is automatically set according to the display language of the smart device. If the display language of the smart device is not supported by SnapBridge 360/170, it is set to English.
  • See the online manual for more information on use (ASnapBridge 360/170 Online Manual).
  • For an overview, you can also visit the dedicated Nikon website.

    http://snapbridge.nikon.com